Home > American Iron Horse
Minimum orders $100 or more!
Sort By:
Page of 4
Chrome American Ironhorse Belt Guard Strap #N35003803 for Choppers - NEW!!!
Our Price: $6.95

American Ironhorse belt guard strap for custom choppers. We do not know which specific models this was designed to fit.We received this through the buyout of American Ironhorse when the company went out of business. Unfortunately when AIH went out of business the websites which hosted their catalogs were removed, therefore we are unable to look up which specific AIH models this belt guard strap was designed to fit. The box these came in is labeled: N35003803 BeltGuardStrap 250R/D Stealt C. We do not know if the "250R" indicates this is designed for motorcycles with a 250R rear tire. To help you determine if this chrome belt guard strap will fit your application we have measured it. Using the first picture as a reference this measured as follows:
*Overall width is about 8-5/8". The distance from the center of the hole on the left side to the center of the hole on the right side is about 7-5/8". The distance between the two holes in the center of this belt guard strap, measuring from the center of one hole to the center of the other is about 0.785". Please keep in mind these measurements may be slightly inaccurate.
Unfinished American Ironhorse Ignition Cover for 111" Motors - NEW!!!
Our Price: $6.95

American Ironhorse ignition cover, unfished for 111" motors. We received this through the buyout of American Ironhorse when the company went out of business. Unfortunately when AIH went out of business the websites which hosted their catalogs were removed, therefore we are unable to look up which specific AIH models this ignition cover will fit. Since this has "111" on it it's obviously for American Ironhorse motorcycles which have the 111" motor. The overall diameter of this cover is about 3.097" and the distance between the two mounting holes, measuring from the center of one to the center of another, is about 2.476". We suggest you compare these measurements to your engine to help determine if this will fit your application.
American Ironhorse #Q21000904M Rear Oil Tank Mounting Bracket - NEW!!!
Our Price: $6.95

Rear oil tank mounting bracket for American Ironhorse Tejas and LSC models as well as custom choppers.

We received this through a buyout and all of the information we have on it is listed here. This came in a large box labeled with the American Ironhorse part #Q21000904M and it states this is a rigid oil tank bracket. We found an identical bracket listed on eBay listing #310639944451 which states this is a rear oil tank mounting bracket for American Ironhorse Tejas and LSC models. Unfortunately we were unable to find this listed in our dealer catalogs or any where else online to verify this therefore we suggest you closely compare the bracket pictured to your motorcycle to help determine if this will fit your application. We believe this can also be adapted for use on custom choppers, the fifth picture shows various measurements of this to help you determine if this will fit your motorcycle. Please look over the pictures and review our return policy noted below prior to purchasing this bracket.

The first three pictures show the bracket from various angles. In the fourth picture you can see the label on the box this came in which shows the AIH part #Q21000904M and the fifth picture shows a diagram of this bracket's measurements.
American Ironhorse #H45002404M Ignition Cover for 117" Engines - NEW!!!
Our Price: $9.95

A new, unfinished, American Ironhorse ignition cover for AIH motorcycles with a 117" engine. We received this through a buyout and all of the information we have on it is listed here. This came in a large box labeled with the American Ironhorse part #H45002404M and it states this is an "Ignition Cover 117". We were unable to find this listed online to find which specific AIH models this was designed to fit. This ignition cover measured approximately 3-1/3" in overall diameter, is about 0.306" thick in the center and 0.188" thick on the edges. The distance between the two mounting holes measured 2-7/16" center to center. We suggest you compare these measurements to your motorcycle to help determine if this will fit your application. Please look over the pictures closely and review our return policy noted below prior to purchasing this ignition cover
Lot of 25 American Ironhorse Small Clutch Retaining Circlips - NEW!!!
Our Price: $9.95

A lot of 25 new American Ironhorse small clutch retaining circlips. We do not know which specific models these circlips are for.

We received these through the buyout of American Ironhorse when the company went out of business, unfortunately when AIH went out of business their websites were removed. Since the websites are no longer available we are unable to find any information on these circlips to identify their applications. The box these came in has AIH part #W21000400 on it. Unfortunately we were unable to find any information on this part number online. We suggest you compare the circlips pictured to your existing ones to help determine if these will fit your motorcycle.

The first three pictures show the 25 circlips from various angles and in the fourth picture you can see a close up of two circlips. The fifth picture shows the label which is on the box we received these in which shows the AIH part#W2100000 and the description: clutch ret. ring inter circlip sm.
American Ironhorse #Q21001405 Oil Tank Bracket for 2005-2006 Slammer - NEW!!!
Our Price: $9.95

Oil tank mounting bracket for the 2005-2006 American Ironhorse Slammer. We do not know if this will fit any other years or models; however we believe you can adapt it for use on custom choppers as well.

We received this through a buyout and all of the information we have on it is listed here. This came in a large box labeled with AIH part #Q21001405. We were unable to find this part number listed online or in our catalogs; however we found an identical looking bracket on eBay listing #310463117194 which states this fits the 2005-2006 Slammer models. Since we have no way to verify this we have measured this bracket to help you determine if it will fit your motorcycle. Please refer to the diagram in the fifth picture for measurements on this. Please look over the pictures closely and review our return policy noted below prior to purchasing this oil tank mounting bracket.

The first two pictures show the bracket from various angles. In the third picture you can see the label on the box this came in which shows the AIH part #Q21001405. The fourth picture shows eBay listing #310463117194 which shows an identical bracket and states it fits 2005-2006 Slammer models. The fifth picture shows a diagram with numerous measurements of this bracket.
Lot of 20 American Ironhorse 1" Diameter 0.442" Thick Carburetor Spacers - NEW!
Our Price: $9.95

A lot of 20 new American Ironhorse 0.442" thick carburetor spacers.

We received this through the buyout of American Ironhorse when the company went out of business. Unfortunately when AIH went out of business the websites which hosted their catalogs were removed, therefore we are unable to look up which specific AIH models these carb spacers were designed to fit. The box these came in is labeled: K21001102M Carburetor Spacer .442 M. To help you determine if these carb spacers will fit your application we have measured one. Using the third picture as a reference these measured as follows:
*Overall diameter is about 1", center hole is 0.516". These spacers are 0.442" tall. Please keep in mind these measurements may be slightly inaccurate.

The first two pictures show the 20 carb spacers included in this listing. The third picture shows one spacer close up. In the fourth picture you can see a diagram which shows the measurements noted above. In the fifth picture you can see the label on the box we received these in which shows the AIH part #K21001102M.
Lot of 6 American Ironhorse #T79007903 0.868" Diameter Brake Caliper Pistons
Our Price: $9.95

A lot of six new American Ironhorse 0.868: diameter caliper pistons for use in 6-piston calipers.

We received these through a buyout of American Ironhorse parts and all of the information we have on these is listed here. These came in a large box labeled with the AIH part #T79007903 and it states these are 0.868 diameter pistons for 6-piston calipers. Unfortunately we were unable to find these listed online to identify which specific AIH models these were designed to fit; however we believe you can adapt them for use on custom choppers as well. These caliper pistons measured about 22.09mm in over diameter, the center is 17.23mm in diameter, the walls are 2.50mm thick and these are about 15.93mm tall. We suggest you compare these measurements to your existing caliper pistons to help determine if these will fit your calipers. Please look over the pictures closely and review our return policy noted below prior to purchasing these.

The first two pictures show the lot of six caliper pistons included in this listing. The third picture shows the label on the box they came in which shows the AIH part #T79007903. In the fourth picture you can see another one of our eBay listings for different size caliper pistons, we believe AIH produced numerous 6-piston calipers therefore you will need to closely compare the measurements provided to your existing calipers to help determine which pistons you need. The fifth picture shows a diagram which provides the same measurements noted above.
American IronHorse "Slammer" Primary Inspection Cover
Our Price: $12.95

Inspection cover for American IronHorse "Slammer" Choppers. You may be able to use this for other applications as well. Please keep all of this in mind when bidding.We received this through a dealer buyout and all of the information we have on it is listed here. The first two pictures show both sides of this inspection cover. You can see the cover on an angle in the third picture. The fourth picture shows the backside of this and where it is engraved with: 070604-02. R6. We did not check each cover we received through the buyout to check is each one has the same engraving on it. The fifth picture shows the label which lists this as being a chrome "Slammer" inspection cover part #N19000700C. We were unable to find any information on this in our dealer catalogs or online.
American Ironhorse "Spy II" Front Brake Rotor Carrier
Our Price: $12.95

American Ironhorse "Spy II" style left front brake rotor carrier for American Ironhorse choppers. We do not have the right side. You may be able to use this for custom applications as well. Please keep all of this in mind when bidding. We received this through a dealer buyout and all of the information we have on it is listed here. The first two pictures show both sides of this rotor carrier. In the third and fourth pictures you can see close ups of the detail on this item. The fifth picture shows a label on this which lists this as being a left front "Spy II" rotor holder, part #T81023704M. We were unable to find any additional information on this in our dealer catalogs or online.