Home > Big Dog Motorcycle
Minimum orders $100 or more!
Sort By:
Page of 8
Big Dog Polished Point Cover #50045
Our Price: $9.95

A new polished two hole Big Dog Motorcycles points cover that may be adaptable to some custom choppers. We do not know which specific years or models of Big Dog Motorcycles this will fit; however we do believe you could also use it on custom applications as well. We received this through a buyout and all of the information we have on it is listed here. This came in a large box labeled with part #BD50045 and hand written on the box read: Polished Big Dog Motorcycles Points Cover. Since we do not know which models this will fit we have measured it to help you determine if this will fit your motorcycle. This points cover measured 3.102" in overall diameter and is about 0.221" thick. As you can see in the second picture the backside of this is not smooth. The recessed circle in the center of this points cover measured 1.940" in diameter, from the edge of the circle to the edge of the points covered measured about 0.566". The distance between the two mounting holes, measuring from the center of one to the center of the other, measured about 2.455". Please compare these measurements to your motorcycle to help determine if this will fit your application prior to purchasing this item.
4 Polished Big Dog #BD21361P 1.201" Long Wheel Spacers for 3/4" Axles
Our Price: $9.95

A lot of four new polished Big Dog Motorcycles 1.201" long wheel spacers for 3/4" axles on Big Dog Motorcycles and Custom Choppers. We received these through a buyout and all of the information we have on them is listed here. These came in a box labeled with the Big Dog part #21361P and hand written on the box read: Polished Wheel Spacer. We were unable to find these listed online to identify which specific Big Dog motorcycles these will fit; however we do believe they can be adapted to custom choppers are well. To help you determine if these spacers will fit your motorcycle we suggest you compare the following measurements to your motorcycle: The overall diameter of these measured 1.250". The center hole measured 0.753" in diameter and the walls on these are 0.257" thick. These wheel spacers are 1.201" long.
Big Dog Motorcycles #BD26292 Battery Tray Adaptable to Custom Chopper Projects
Our Price: $9.95

A new black battery tray for Big Dog Motorcycles and custom choppers.

We received this through a buyout and all of the information we have on it is listed here. This came in a large box labeled with Big Dog part #BD2626-2 and hand written on the box read: Tray Battery. Unfortunately we were unable to find this listed in our dealer catalogs or online to identify which specific Big Dog Motorcycles this was designed to fit. We have measured this battery tray to help you determine if it will fit your motorcycle. Please compare the measurements shown in the fifth picture to your application.

The first four pictures show the battery tray from various angles. In the fifth picture you can see a diagram which provides measurements of this battery tray.
4 Big Dog Motorcycle #5522-1 4" x 4" Battery Cushions Adaptable to Choppers
Our Price: $9.95

Lot of 4 Big Dog #5522-1 battery pads for Big Dog motorcycles which can also be adapted for us on custom choppers.

We acquired these through a buyout and all the information we have on them is listed here. These came in a box with a label that had Big Dog part #BD5522-1 and read: Battery Pads. We were unable to find these listed online or in any of our dealer catalogs to determine what motorcycles these will fit. If you take a look at picture#5 we made a diagram of measurements we have taken of the pads in order to help you determine if these will fit your motorcycle.

The first four pictures show various views of the battery pads and the fifth picture shows the diagram of measurements we have taken of the pads.
Pair of Polished Fork Caps for Big Dog Motorcycles
Our Price: $9.95

A pair of polished fork top caps for use on Big Dog Motorcycles. We do not know which specific models these will fit nor do we know if they will fit any other makes of motorcycles.

We received these through a buyout and all of the information we have on them is listed here. These came in a large box labeled with Big Dog part #DB22011P and hand written on the box read: Polished GCB Fork Top Cap. We were unable to find these listed online to help identify which motorcycles these will fit. To help you determine if these will fit your motorcycle we have measured them. The top of these measured 1.480" in diameter. They stand about 0.585" tall and the bottom lip is about 0.229" tall. The center hole on these measured about 0.505" in diameter. The lip, or bottom, is about 0.952" in diameter and about 0.226" thick. Please look over the pictures closely and review our return policy noted below prior to purchasing these.

The first four pictures show the fork caps from various angles and in the fifth picture you can see them next to a ruler for size reference.
Lot of 10 Big Dog #BD15051P Fender/Exhaust Spacers Adaptable to Choppers
Our Price: $9.95

Lot of 10 new Big Dog #BD15051P polished fender/exhaust spacers for Big Dog motorcycles and adaptable to custom Choppers. We do not know what specific makes or models these will fit.

We acquired these through a buyout and all the information we have on them is listed here. These came in a box with a label that had Big Dog part #BD15051P and read: Polished Fender/Exhaust Spacer. We were unable to find these listed online or in any of our dealer catalogs to determine which motorcycles these will fit. If you take a look at picture #5 it shows a diagram of measurements we have taken to help you determine if these will fit your motorcycle. Please take a close look at the pictures and review our return policy below prior to making a purchase

The first four pictures show various views of the spacers and the fifth picture shows the diagram of the measurements we have taken of the spacers.
Lot of 6 Big Dog #5524-1 7" x 4" Battery Pads for Big Dog Cycles & Choppers
Our Price: $9.95

A lot of six new 7" x 4" battery pads for use on Big Dog Motorcycles and adaptable to custom choppers.

We received these through a buyout and all of the information we have on them is listed here. These came in a large box labeled with the Big Dog part #5524-1 and hand written on the box read: Battery Pad. Unfortunately we were unable to find these listed online to identify which specific Big Dog Motorcycles they were designed to fit; however we believe they can be adapted for use on custom choppers as well. These battery pads are about 7" x 4", we suggest you compare these measurements to your motorcycle to help determine if these will fit your application. Please look over the pictures closely and review our return policy noted below prior to purchasing these.

The first two pictures show the six battery pads included in this listing and the following two pictures show one close up. The fifth picture shows a diagram which provides the same measurements noted above.
Lot of 4 Big Dog #55221 6 3/4" x 3" Foam Battery Pads Adaptable to Choppers
Our Price: $9.95

Foam battery pad for motorcycles.

We received these through a buyout and all of the information we have on them is listed here. We received these in a large box which was labeled with part number: BD55221 and hand written on the box read: Foam Battery Pad. These measured 6-3/4" x 2.955" and are 0.478" thick.

The first four pictures show the battery pad from various angles. The fifth picture shows a diagram which shows the measurements of this battery pad.
3 Polished Big Dog #21501P 1.50" Wide Stepped Down Wheel Spacers for 3/4" Axles
Our Price: $9.95

A lot of three new polished Big Dog Motorcycles wheel spacers for custom choppers. We do not know which specific Big Dog Motorcycles these were designed to fit; however we do believe you could use them for custom applications as well.

We received these through a buyout and all of the information we have on them is listed here. Unfortunately we were unable to find these spacers listed in our dealer catalogs or online. These came in a large box which was labeled with Big Dog Motorcycle part # BD21501P and hand written "polished wheel spacer". To help you determine if these will fit your motorcycle we have measured them. Using the fifth picture as a reference these measured as follows: From the end on the left of the picture to where it steps down measured approximately 0.603", from the step down to the end on the right side of the picture measured approximately 0.948", having an overall height of approximately 1.551". The wider end on these spacers, left side of the picture, measured approximately 1.488" in diameter. The smaller end of the these spacers, shown on the right side of the picture, measured approximately 1.132" in diameter. The hole through the spacers has an inner diameter of approximately 0.752". We used a cheap, basic digital vernier so these measurements may be slightly off, which is why we stated that they were approximate measurements. We suggest you compare these measurements to your motorcycle to help determine if these will fit your application.

The first four pictures show the polished wheel spacers from various angles and in the fifth picture you can see one close up.
4 Big Dog Motorcycles #BD26061 Foot Stud Spacers
Our Price: $12.95

A lot of four new Big Dog Motorcycles left hand foot stud spacers for use on Big Dog Motorcycles and custom choppers. We received these through a buyout and all of the information we have on them is listed here. These came in a large box labeled with the Big Dog Motorcycles part #BD26061 and hand written on the box read: Footpeg Stud Spacer. Unfortunately we were unable to find these listed online to identify which specific Big Dog Motorcycles these were designed to fit. To help you determine if these will fit your motorcycle we suggest you compare the measurements shown in the fifth picture to your motorcycle.