Home > Choppers
Minimum orders $100 or more!
Sort By:
Page of 8
Custom Chrome #19621-A Chrome Lock Holder for Custom Choppers - NEW!!!
Our Price: $6.95

A new chrome lock holder for use on custom choppers.

We received this through a buyout and all of the information we have on it is listed here. Unfortunately we were unable to find this listed in our dealer catalogs or online to identify which specific motorcycles this was designed for. To help you determine if this will fit your motorcycle we have measured this lock holder. Please refer to the diagram shown in the fifth picture for measurements. Please look over the pictures closely and review our return policy noted below prior to purchasing this.

The first picture shows the lock holder in the original packaging and the following two pictures show it from various angles. The fourth picture shows the label on the packaging which shows the Custom Chrome part #19621-A. The fifth picture shows a diagram which provides various measurements of this lock holder.
Lot of Four Chrome 41mm Long Fender Spacers for Custom Choppers - NEW!!!
Our Price: $6.95

A lot of four new chrome fender spacers for use on custom choppers.

We received these fender spacers through a buyout and all of the information we have on them is listed here. The label on the packaging states these are replacement fender spacers to be used with Custom Chrome wide glide conversion kit part numbers: 13039 and 13040. We believe you can adapt these for use on custom choppers as well, to help you determine if these will fit your application we have measured them. These fender spacers are approximately 41.26mm long, have an inner diameter of about 8.24mm, an outer diameter of about 15.87mm and the walls are about 3.91mm thick. We suggest you compare these measurements to your motorcycle to help determine if they will fit your application. Please look over the pictures closely and review our return policy noted below prior to purchasing these.

The first picture shows the fender spacers in their original packaging and the following two pictures show them from various angles. In the fourth picture you can see the label on the packaging which shows the Custom Chrome part #09567 and the fifth picture shows a diagram of the same measurements noted above.
Lot of 20 Rectangular Metal Plate Spacers for Custom Choppers - NEW!!!
Our Price: $6.95

A lot of 20 new rectangular metal spacers with cut outs for use on custom choppers.

We received these through a buyout and all of the information we have on them is listed here. These spacers were not labeled with any part numbers to help us identify their manufacturer; however we believe these are from either American Ironhorse or Big Dog Motorcycles since we received a large amount of spacers through the buyout these came from. To help you determine if these will work with your application we have measured them. Using the fourth picture as a reference these measured as follows:
*These are approximately 2.020" by 1.209" and are about 0.80" thick. The distance between the two holes on the bottom of this are 1.698" apart, measuring center to center, and 0.175" in diameter. The distance from the center of the bottom left hole to the center of the small hole above it measured about 0.760" and from that hole to the one on the top measured 0.5251" apart. The large hole in the center is about 0.497" in diameter.
We suggest you compare the spacers pictured and measurements provided to your motorcycle to help determine if these will fit your application. Please look over the pictures closely and review our return policy noted below prior to purchasing these.

The first two pictures show the lot of 20 spacers included in this listing. The third and fourth pictures show one spacer close up. In the fifth picture you can see a diagram which shows the same measurements noted above.
Nacelle Trim Strip for Doss Headlight Housing-$21 NEW!
Our Price: $6.95

Replacement nacelle trim strip for use with Doss custom teardrop headlight housing kits on 1986-2004 FL Softails and custom bikes with late FLST front ends. This is the trim that covers the gap between the two aluminum housings. It might be adaptable to the stock FLH aluminum housings or some other custom applications. It is 8" long and appears to be made out of a heavy diecast material.
We received this in a dealer buy out and all of the information we have on it is listed here. The 1st three pictures show everything included with this listing. The 4th picture shows the label on the package with part #92208. The last picture shows the listing for this in the 2007 Custom Chrome catalog.
This listing includes everything seen in the pictures. Anything else required will have to be provided separately.
Lot of 5 #152.5 Main Jets for Mikuni HSR42 and HSR45 Carburetors - NEW!!!
Our Price: $6.95

A lot of five new #152.5 main jets for use in Mikuni HSR42 and HSR45 carburetors. We do not know if these will fit any other carbs, nor do we know which specific models have the HSR42 and HSR45 carbs.

We found these jets listed on the Custom Chrome Europe website which is where we acquired the application information listed above. If you are unsure these jets will fit your carburetor we suggest you contact your local Harley dealer for application assistance.

The first four pictures show the jets from various angles. In the fifth picture you can see the label on the packaging which shows the Custom Chrome part #29741 and the MFG part #N100.604-152.5. You could probably acquire additional application information by searching the internet for the manufacturer's part number.
Chrome Mounting Bracket for Bottom Mount Headlight Used on Custom Choppers - NEW
Our Price: $6.95

Bottom headlight mounting bracket for use on custom choppers.

We received this through a buyout and all of the information we have on it is listed here. This is labeled as being a "h/lite ring and nut" however we believe this is mislabeled. Our Parts Manager looked over this mounting bracket and stated he believes it is a bottom headlight bracket, obviously it is not a headlight ring. Since we have very limited information on this we have measured it to help you determine if it will fit your motorcycle. This mounting bracket measured approximately 1.683" in overall length, 2.005" tall including the bolt and the body of this mount alone, without the bolts, measured about 1.175" long. The body of this mount is approximately 0.857" square. Please compare the measurements provided to your motorcycle to help determine if this will suit your needs.

The first picture shows the bracket in its original packaging and the following two pictures show it from various angles. The fourth picture shows the label on the packaging which shows the Custom Chrome part #12509 and the fifth picture shows a diagram of the same measurements noted above.
Chrome Specialties Forward Control Hardware Kit - NEW!!!
Our Price: $9.95

A new Chrome Specialties forward control hardware kit. We do not know which specific motorcycles or forward controls this kit was designed to fit.

We were unable to find this hardware kit in our dealer catalogs or online. The packaging states it is a hardware kit for forward controls; however as stated above we do not know which specific motorcycles or forward controls this will fit. We suggest you look over the pictures closely to help determine if this hardware kit will fit your forward controls and motorcycle. You may be able to use this hardware on other assemblies other than forward controls.

The first picture shows everything included in this hardware kit. The second, third and fourth pictures show the pieces close up. The fifth picture shows the label on the packaging which shows the part #047400 and where it states this hardware kit is for #060333-340. Unfortunately we were unable to find information on the applications this kit will fit
10 Chrome 5/16" Hose to 1/8" Pipe Thread Fittings for AIH M/C's & Custom Chopper
Our Price: $9.95

10 new chrome 5/16" hose x 1/8" pipe hose and tank fittings for use on American Ironhorse motorcycles and custom choppers.

We received these through a buyout of American Ironhorse parts and all of the information we have on them is listed here. These came in a large box labeled with the American Ironhorse part #R35001402 which states these are gas tank fittings and the bags these fittings are in states they are part #7-90HB-5X2. We were unable to find any information about these fittings based on the AIH part number; however part #7-90HB-5X2 displays on several websites as being 5/16" hose x 1/8" pipe hose and tank fittings. We do not know which specific AIH models these were designed to fit; however we believe they are universal and can be used on custom choppers as well. Please look over the pictures closely and review our return policy noted below prior to purchasing these.
The first picture shows the bag containing 10 chrome fittings. In the second, third and fourth pictures you can see one from various angles. The fifth picture shows the label on the box these came in which shows the AIH part #R35001402.
American Ironhorse #M95000702 Top Motor Mount Adaptable to Custom Choppers - NEW
Our Price: $9.95

A new American Ironhorse top motor mount for use on AIH motorcycles and custom choppers. Please note that we believe this is chrome plated steel. As you can see in the pictures, the one tab has very little chrome plating on it. The rest of the bracket is ok, but it is definitely not show chrome.

We received this through a buyout and all of the information we have on it is listed here. This came in a large box labeled with the American Ironhorse part #M95000702 and it states this is a "Motor Mount Top SS P". Unfortunately we were unable to find this listed online or in our catalogs to identify which specific AIH models this was designed to fit; however we believe this can be adapted for use on custom choppers as well. We do not know if the "SS P" on the label means this is a polished stainless steel mount or if this is a polished mount for S&S motors. Please refer to the diagram in the fifth picture to help determine if this will fit your motorcycle. Please look over the pictures closely and review our return policy noted below prior to purchasing this engine mount.

The first three pictures show the top motor mount from various angles. In the fourth picture you can see the label on the packaging which shows the American Ironhorse part #M95000702. The fifth picture shows a diagram of numerous measurements of this motor mount.
Brake Pads for PVM 6 Piston Brake Calipers-NEW!
Our Price: $9.95

Set of Ferodo Platinum brake pads for custom PVM 6 piston calipers. We do not know what models or years these may fit.
We received this in a dealer buy out and all of the information we have on it is listed here. The first picture shows everything included in this listing. In the second and third pictures you can see the pads close up. The fourth picture shows the label on the packaging with the Motorcycle Stuff part #4544245 and the Ferodo part #FRP417P. In the fifth picture you can see the listing for these pads in the 2005 Motorcycle Stuff catalog. This listing states these will fit the caliper listed above. These are no longer listed on the Ferodo web site so we do not have any other information on them.
These pads measure about 3.97" wide, 1.71" tall and are about 0.24" thick including the brake pad and backing plate. These measurements were taken with a digital caliper.
This listing includes everything seen in the pictures. Anything else required will have to be provided separately.